Heat pump guide

Heat pumps for homes & businesses

Thinking about an air source heat pump? Start here. Choose the type of heat pump and installation your property needs, compare the brands our installers fit, and see how the £7,500 Boiler Upgrade Scheme grant works.

Heating and hot waterAir source or ground sourceHomes and businesses£7,500 grant
Family playing in the garden of a modern house with an air source heat pump
STEP 1: CHOOSE A TYPE

Air source or ground source: which heat pump do you need?

There are two main types of heat pump. Both heat your radiators, underfloor heating and hot water, and neither is air conditioning. Most homes choose air source, and it is what our recommended installers fit.

Air source heat pump outside a brick-built home
MOST POPULAR

Air source heat pumps

An outdoor unit takes heat from the air, even below freezing, and uses it to warm your home. They come in two designs: monobloc, where everything sits in the outdoor unit, and split, where part of the system sits indoors.

Best for: Most UK homes and many commercial buildings.

LARGER PLOTS

Ground source heat pumps

Pipes buried in the garden, or in a borehole, collect heat from the ground. They are very efficient but cost more to install and need outdoor space. Ask your installer whether ground source suits your property.

Best for: Larger gardens, rural properties and some new builds.

Step 2: Choose your installation

What type of heat pump installation does your home need?

No two homes are the same. After a survey and a room-by-room heat loss calculation, your installer will recommend one of these routes.

Most common

Retrofit: boiler to heat pump

Your boiler is swapped for a heat pump and hot water cylinder. Radiators and pipework that are already the right size stay where they are.

Best for: Homes with a working radiator system.

Least disruption

Heat Geek ZeroDisrupt

A Heat Geek designed installation that keeps changes to your home to a minimum wherever the design allows, from a Heat Geek accredited installer.

Best for: Homeowners who want the least upheaval.

Best efficiency

Full system upgrade

New radiators, pipework, cylinder and controls where the design shows they are needed, so the heat pump runs at a low flow temperature and stays efficient.

Best for: Older or larger homes and undersized radiators.

Renovations

Heat pump with underfloor heating

Heat pumps and underfloor heating work well together because both run at low temperatures. It can cover a whole home or just an extension.

Best for: Extensions, renovations and new builds.

For businesses

Commercial heat pumps

Larger heat pumps, often several units working together, for offices, schools, care homes and other commercial buildings, including replacing gas, oil or LPG plant rooms.

Best for: Businesses and public sector buildings.

Every good installation starts with the design

A heat pump is only as good as the design behind it. Before quoting, a good installer works out how much heat each room needs and sizes everything around that.

  • Room-by-room heat loss calculation
  • Radiator and pipework checks
  • Hot water cylinder sizing
  • Low flow temperature design
Read our heating design guide
STEP 3: CHOOSE A BRAND

Heat pump brands our installers fit

Vaillant and Viessmann are the brands our recommended installers fit most, and Ideal and Worcester Bosch are popular choices too. Here is how each range compares.

Vaillant logo

Vaillant heat pumps

Vaillant is the brand our recommended installers fit most. The aroTHERM range is quiet, efficient and well supported in the UK, with a monobloc and a split option.

Vaillant aroTHERM plus monobloc air source heat pump
MOST POPULAR

aroTHERM plus

Vaillant’s best-selling monobloc, using natural R290 refrigerant. It reaches flow temperatures up to 75°C, so it suits older homes as well as new ones, from 3.5kW to 12kW.

Monobloc

Vaillant aroTHERM Split air source heat pump
FOR TIGHTER SPACES

aroTHERM split

A compact outdoor unit linked to an indoor unit by refrigerant pipes. A good fit where water pipes can’t easily run outside the home.

Split

Viessmann logo

Viessmann heat pumps

Viessmann’s Vitocal range uses natural propane refrigerant across the board, and runs from great-value home models to commercial units for larger buildings.

Viessmann Vitocal 150-A monobloc air source heat pump
GREAT VALUE

Vitocal 150-A

A monobloc with natural refrigerant and flow temperatures up to 70°C, from 4kW to 16kW. The 151-A version has a 190-litre hot water cylinder built in.

Monobloc

Viessmann Vitocal 250-A monobloc air source heat pump
PREMIUM

Vitocal 250-A

Viessmann’s premium monobloc for homes, using R290 refrigerant, with flow temperatures up to 70°C and a focus on quiet running. Check UK availability with your installer.

Monobloc

Viessmann Vitocal 250-A Pro commercial air source heat pump
COMMERCIAL

Vitocal 250-A Pro

A 40kW heat pump for larger buildings, public sector sites and commercial projects, designed to be cascaded with further units. Needs a three-phase supply.

MonoblocCommercial

Ideal Heating logo

Ideal heat pumps

Ideal is one of the UK’s best-known boiler makers, and its Logic Air heat pump brings the same simple, reliable approach to air source heating.

Ideal Logic Air monobloc air source heat pump
FOR HOMES

Logic Air

Ideal’s monobloc heat pump for homes, in 4kW, 5kW, 8kW and 10kW models with outputs up to 10.3kW. It uses R32 refrigerant and every model is Quiet Mark certified.

Monobloc

Ideal ECOMOD 290HT commercial air source heat pumps
COMMERCIAL

ECOMOD 290HT

Ideal Commercial Heating’s high-temperature range for commercial buildings, using natural R290 refrigerant, with models up to 65kW.

Commercial

Worcester Bosch logo

Worcester Bosch heat pumps

Worcester Bosch is a household name for boilers, and its Compress heat pumps cover quiet monobloc models, a compact split and options for larger homes.

Worcester Bosch Compress 5800i AW monobloc air source heat pump
QUIETEST

Compress 5800i AW

A Quiet Mark approved monobloc using R290 refrigerant, with flow temperatures up to 75°C, in 4kW, 5kW and 7kW sizes.

Monobloc

Worcester Bosch Compress 3400i AWS split air source heat pump
COMPACT SPLIT

Compress 3400i AWS

A compact split heat pump with a small indoor unit, for homes where a split system makes more sense.

Split

Worcester Bosch Compress 7001i AW monobloc air source heat pump
LARGER HOMES

Compress 7001i AW

Worcester Bosch’s range of higher outputs for bigger homes with a greater heat demand.

Monobloc

HOMES AND BUSINESSES

Domestic and commercial heat pumps

Air source heat pumps work in homes of every size, and in offices, schools, care homes, warehouses and other commercial buildings.

DOMESTIC

Heat pumps for your home

For houses, bungalows and flats, from a straight boiler swap to a full system upgrade. Eligible homes in England and Wales can get £7,500 off through the Boiler Upgrade Scheme.

COMMERCIAL

Heat pumps for your business

Larger and cascaded heat pump systems for commercial and public sector buildings, including replacing gas, oil or LPG plant rooms.

How it works

How a heat pump installation works

From your first enquiry to a warm home, a good installation follows the same five steps.

1

Tell us about your property

Share a few details about your home or building, your current heating and what you want to achieve.

2

Survey and heat loss calculation

The installer visits, measures each room and works out exactly how much heat your property needs.

3

Design and quote

You get a system design, the right size heat pump, any radiator or cylinder changes, and a clear quote.

4

Installation

The heat pump, cylinder and controls are fitted, usually over a few days, with your old boiler taken away.

5

Handover and grant

The system is commissioned and set up, and you are shown how to get the best from it. Eligible grants are claimed for you.

Boiler Upgrade Scheme grant

Eligible homes in England and Wales can get money off an air source heat pump through the government's Boiler Upgrade Scheme. The grant is claimed by an MCS certified installer and comes straight off your quote.

£7,500off a qualifying air source heat pump
£9,000for eligible homes replacing oil or LPG

Heat Geek installers

We also work with these Heat Geek installers

Heat Geek is an independent training and accreditation programme for heat pump installers, built around proper heat loss calculations and low flow temperatures. These recommended installers hold Heat Geek accreditation. Tap one to see their page.

Heat Geek is an independent company. Hallamshire Energy is not part of Heat Geek and is not a Heat Geek installer.

HEAT PUMP QUESTIONS

Heat pump FAQs

It depends on the size of heat pump your property needs, the hot water cylinder and how much of the heating system needs upgrading. Your installer gives you a clear quote after the survey and heat loss calculation, and the Boiler Upgrade Scheme grant comes off that price for eligible homes.

It is a government grant for homes in England and Wales. It gives £7,500 towards a qualifying air source heat pump, or £9,000 for eligible homes replacing oil or LPG heating. The grant is claimed by an MCS certified installer and taken off your quote.

Not always. Many radiators are already big enough, especially in well insulated homes. The heat loss calculation shows which rooms, if any, need larger radiators so the heat pump can run at a low, efficient temperature.

Neither is better in every home. Monobloc is the most common because everything sits in one outdoor unit and no refrigerant work is needed indoors. A split system suits homes where water pipes can't easily run outside. See our monobloc vs split guide.

Yes. Air source heat pumps are built to keep working well below freezing. A correctly sized and designed system keeps your home warm right through a UK winter.

Modern units are quiet, and several of the models on this page carry the Quiet Mark. Your installer chooses a position that keeps sound away from bedrooms and neighbours.

Most air source heat pumps on houses in England are permitted development, so planning permission is not usually needed if the unit meets the size and position rules. Listed buildings, flats and some conservation areas can be different, and your installer will check.

Most home installations take a few days. Commercial projects vary with the size of the building, the number of units and the plant room work involved.

Yes. Larger heat pumps, or several units working together, can heat offices, schools, care homes and warehouses, and can replace gas, oil or LPG plant rooms. See our recommended installers for your area.

Not sure which heat pump is right for you?

Tell us a little about your home or building and we will put you in touch with the right recommended installer for your area.